For decades there was just one single dependable option to keep information on your personal computer – employing a disk drive (HDD). However, this type of technology is by now displaying its age – hard drives are noisy and slow; they can be power–hungry and tend to generate a great deal of heat in the course of intense procedures.

SSD drives, in contrast, are really fast, consume a smaller amount energy and are also far less hot. They feature an exciting new approach to file access and data storage and are years ahead of HDDs relating to file read/write speed, I/O performance and also energy effectivity. Observe how HDDs fare against the newer SSD drives.

1. Access Time

A result of a revolutionary new way of disk drive operation, SSD drives enable for faster data access speeds. With an SSD, file accessibility instances are far lower (just 0.1 millisecond).

The technology behind HDD drives goes all the way back to 1954. And even while it has been drastically refined through the years, it’s nonetheless no match for the inventive technology powering SSD drives. Utilizing today’s HDD drives, the top file access speed you are able to attain varies somewhere between 5 and 8 milliseconds.

2. Random I/O Performance

Because of the brand–new revolutionary data file storage solution incorporated by SSDs, they supply speedier data access speeds and quicker random I/O performance.

During our tests, all of the SSDs confirmed their ability to deal with at the least 6000 IO’s per second.

With a HDD drive, the I/O performance gradually increases the more you apply the disk drive. Nevertheless, right after it extends to a certain limitation, it can’t go speedier. And due to the now–old concept, that I/O restriction is a lot below what you can get having an SSD.

HDD are only able to go so far as 400 IO’s per second.

3. Reliability

SSD drives are meant to have as fewer rotating parts as feasible. They utilize a similar technology like the one used in flash drives and are also significantly more trustworthy when compared to regular HDD drives.

SSDs offer an average failure rate of 0.5%.

To have an HDD drive to operate, it has to spin a few metal disks at more than 7200 rpm, holding them magnetically stable in mid–air. There is a large amount of moving parts, motors, magnets and other gadgets crammed in a small space. Therefore it’s no surprise that the regular rate of failing of the HDD drive varies in between 2% and 5%.

4. Energy Conservation

SSDs do not have moving parts and require little or no chilling power. They also involve a small amount of power to function – lab tests have demostrated they can be operated by a standard AA battery.

As a whole, SSDs use up between 2 and 5 watts.

From the second they were built, HDDs have invariably been really energy–heavy systems. So when you have a server with several HDD drives, this can increase the month–to–month electric bill.

Normally, HDDs consume somewhere between 6 and 15 watts.

5. CPU Power

The quicker the data accessibility rate is, the swifter the data queries will likely be delt with. Because of this the CPU won’t have to reserve assets waiting for the SSD to reply back.

The common I/O delay for SSD drives is 1%.

If you use an HDD, you’ll have to spend more time looking forward to the outcomes of your data ask. Consequently the CPU will be idle for much more time, looking forward to the HDD to respond.

The regular I/O delay for HDD drives is around 7%.

6.Input/Output Request Times

It’s time for a few real–world cases. We ran a detailed system backup on a server only using SSDs for data storage reasons. During that procedure, the common service time for any I/O query kept under 20 ms.

In comparison to SSD drives, HDDs provide considerably reduced service times for I/O queries. In a web server backup, the common service time for an I/O call varies between 400 and 500 ms.

7. Backup Rates

You can actually notice the real–world benefits of using SSD drives each and every day. By way of example, on a web server pre–loaded with SSD drives, a complete data backup is going to take merely 6 hours.

In the past, we have employed primarily HDD drives with our servers and we’re familiar with their effectiveness. With a server built with HDD drives, a full hosting server data backup usually takes around 20 to 24 hours.

Should you want to at once improve the overall overall performance of your respective web sites without needing to change any kind of code, an SSD–equipped web hosting service is a very good alternative. Check ADI Web Hosting’s shared hosting services packages and our Linux VPS hosting services – these hosting services feature fast SSD drives and can be found at cheap prices.

  • Service guarantees

  • Subscribe today. There won’t be any installation costs and you’ll have total root/administrator access to your server. 99.9% network uptime is warranted.
  • Compare our prices

  • Have a look at our prices and select the right Virtual Private Server for your powerful sites. You can upgrade to a more feature–rich VPS Hosting setup with just a click of the mouse.
  • Compare our hosting plans
  • Contact Us

  • You’re able to make contact with us night and day by email or by utilizing our super–fast ticketing system. Our company offers a 1–hour reply–back time guarantee.